Typical Applications

The Convertible HVAF + HVOF ID thermal spray system is ideal for hardfacing internal diameters of pipes, tubes, barrels, and cylinder bores that can be effectively rotated.
The ID gun provides uniform non-permeable wear and corrosion resistant cermet coatings with a spray rate up to 5 kg or 11 lbs. per hour, achieving a tungsten carbide coating hardness of 950 HV300 in internal diameters less than 4” and over 1,100 HV300 hardness in 4.0” (102 mm) and larger internal diameters.
We recommend using the equipment for thermal spray coating of:
- Pipes and fittings.
- Bends and elbows.
- Pump housings and sleeves.
- Cylinder bores.
- Complex parts, like hydro turbine Francis runners.
Spraying Complex Parts
In some cases, such as pumps or Francis runners, it is not enough to deposit a coating onto internal surfaces. We need to protect both internal and external surfaces. While many shops have just one model of a given technology in-house, we make equipment to address both of these requirements. The Convertible family complements the ID’s capabilities with two outer diameter guns and one Internal Diameter Rotating gun (IDR):
- C7 – a HVAF/HVOF gun for large parts.
- C6 – a general purpose HVAF-HVOF gun.
Click here to go back to HVOF/HVAF Convertible System.