Kermetico C6 Convertible System for High Deposition Efficiency of HVAF / HVOF Tungsten Carbide Coatings

Kermetico’s hybrid C6 HVAF / HVOF torch is useful for spraying a selection of metal, alloy and carbide powders with high deposition efficiency.

Variable system power and powder feed allow spraying almost any industrial parts.

It is easy to integrate into a manufacturing line and control it with gas mass flowmeters and an integrated combustion chamber pressure measuring system.

By request, we produce systems running two or more C6 guns at once to increase spray rate further.

In some cases, such as pumps or Francis runners, it is not enough to deposit a coating onto external surfaces. We need to protect both external and internal surfaces. While many shops have just one model of a given technology in-house, we make equipment to address both of these requirements. Our Convertible family complements capabilities of our C6 gun with other outer and internal diameter guns:

HVAF Process Description and Advantages

The Convertible C6 HVOF/HVAF spray system deposits powders, heated and accele­rated by the oxy-fuel or air-fuel gas combustion products.

The mixture of compressed air, oxygen (in HVOF mode) and the fuel gas flows into the combustion chamber through the orifices of a catalytic ceramic insert. The compressed air cools the chamber when entering the gun.

Then the preheated air is used for mixing with the fuel for combustion. More compressed air cool the front of the chamber and the nozzle assembly.

Initial ignition of the mixture results in heating of the ceramic insert above the mixtures’ auto-ignition temperature and then the hot insert continuously ignites the mixture.The feedstock powder is injected axially into a wide combustion chamber, where the gas flow is comparatively slow, less than 40 m/s (130 ft./sec.).

Having a long residence time and being exposed to favorable heat transfer conditions at high gas pressure, the powder is efficiently heated in the combustion chamber.

The powder exiting the chamber is propelled into the nozzle of chosen length and configuration, where it is accelerated to a velocity that may be over 1,000 m/s (3,300 ft./sec.).

When impacting a sub­strate, the spray powder particles form a coating.

The following particles densify the coating, removing poorly bonded splats and leaving behind only high-quality coating particles.

Business Benefits of the Hybrid HVAF+HVOF Torch

Buy and use fewer systems, investing four times less in a new job shop. The Kermetico Convertible C6 machine sprays 5 times faster than conventional HVOF torches, and there is an option to switch to an ID or hand-held gun with the same system.

Our systems are designed by sprayers for sprayers:

Return your investment spraying a second metric ton of WCCoCr. How?

Eliminate the blasting room – blast and spray with one part setup to improve quality, reduce manufacturing time and reduce blast media consumption by a factor of 100.

Reduce as-sprayed coating thickness and grinding time due to the low roughness of the as-sprayed coating.

You will spend up to 5 times less on each item sprayed with our equipment.

Blast & Spray

Each Kermetico AK HVAF gun can be used in blast and spray operations.

You can eliminate blasting and masking for blasting in a different booth. Just prepare a part for coating, blast it with any AK gun (it is extremely fast and uniform) and spray with the same gun, spending 10x less time for the blasting operation.

It is much faster and more accurate than manual blasting. Furthermore, using HVAF blasting for surface preparation reduces blast media consumption by 100-times compared to blasting with compressed air.

Pages: 1 2 3 4

Leave a Reply