Manual HVAF

The Kermetico hand-held gun is a member of the Kermetico AK family, which means it is operated by the same control system as any of our robot-mounted guns. Kermetico have designed it for manual thermal spray and on-site coating deposition. Existing HVOF hand-held systems are either water-cooled (which substantially limits mobility) or air cooled which provides poor coating quality due to a […]

Set Up Requirements for HVAF

The set up requirements for particular areas of the HVAF and HVOF equipment are available by selecting the relevant tabs. 

Schlumberger WC Test Results for HVAF

Schlumberger is the world’s leading provider of Technology for the Drilling, Production and processing to the Oil & Gas Industry. Operating in more than 85 countries and employing approximately 100,000 people.  The following test report compares several different Tungsten Carbide (WC) HVOF/HVAF sprayed coatings from different coating vendors to determine: Vickers micro-hardness  Erosion rate of […]

Spraying Internal Diameters – HVAF

    The Kermetico ID gun is an effective instrument for spraying tungsten carbide and Hastelloy-type coatings. The Kermetico HVAF AK-ID system is ideal for lining inside diameters of pipes, tubes, barrels, and cylinder bores which can be effectively rotated. The gun provides uniform non-permeable wear and corrosion resistant cermet coatings with a spray rate […]

TMS Bridgemaster® Arc Spray System

TMS Bridgemaster® Arc Spray System

The TMS Bridgemaster® is an excellent choice in low energy, high deposition Arc-Spray Systems. The Bridgemaster® is a heavy duty, lightweight, low energy, high deposition arc spray system for applying metalized coatings. Designed for shop or field applications, the Bridgemaster® metalizing system is a workhorse in any environment. Meters and Controls are conveniently located on the feeder providing “at the […]

HVOF-HVAF Convertible System

Kermetico Convertible equipment offers the final solution for the HVAF vs. HVOF discussion. You no longer need to choose between standardized HVOF equipment and the efficient HVAF processes. You can use the Convertible HVAF & HVOF equipment spraying coatings in HVOF mode conforming to legacy HVOF standards or in an HVAF mode depositing higher-quality and less […]

AK HVAF Multipurpose System

AK HVAF systems work reliably with LPG fuels such as propane, propane-butane, propylene and MAPP-gas as well as with methane and natural gas. The HVAF systems spray metals and carbides at optimal temperature without overheating, and are used for spraying bulk-like gas and liquid impermeable wear and corrosion-resistant coatings. We supply a large variety of different guns in […]

What is HVAF?

Heat Source Fuel (Liquid or Gas) and Compressed Air Flame Material Powder (Metal) Transfer Via the Flame Process The HVAF metal spray process is characterized by a low combustion temperature (1,960-2,010°C | 3,560-3,650°F), high particle velocities (800 to over 1,000 m/s | 2,625-3,281 ft./sec.), resulting in low-oxidized, ductile, non-porous, high-bond carbide and metal coatings. With a spray rate up to 550 g/min […]

What is HVOF?

  Heat Source Fuel (Liquid or Gas) and Oxygen Flame Material Powder (Metal) Transfer Via the Flame Process The Hypersonic Spray Process / High Velocity Oxygen Fuel (HVOF) is a process to apply very dense, strongly adhered coatings. A fuel (commonly kerosene or hydrogen) is mixed with oxygen and ignited in combustion chamber. The combustion […]

Met-PCC HVOF System

The Metallisation Met-PCC(HVOF) system is the latest development to Metallisation’s range of HVOF systems. The Met-PCC(HVOF) system applies all of the simple control / operator interface features of Metallisation’s HVOF and Plasma systems. The ‘–L’ version can be interfaced with the MET-JET4L pistol and/or other non-Metallisation liquid fuel pistols. The ‘-G’ version can be interfaced to a […]